Space possibility in CW ID SYSTEM FUSION › Forums › Requests and Feedback › Space possibility in CW ID Tagged: CTCSS, CW ID, DR-1XE, Space This topic contains 3 replies, has 2 voices, and was last updated by pe2aab 6 months, 3 weeks ago. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts February 25, 2016 at 9:41 am #1381 pe2aabParticipant Dear Readers, In The Netherlands we use a additional suffix behind the call that announces the CTCSS tone that is used. Roughly there are 4 options announced with a letter. For our region it is the letter ‘B’. Setup the repeater callsign with a space between callsign and addition isn’t possible yet. We need ‘PI2EHV B’. Using a dash, colon or any other character will insinuate that it’s a beacon station so we really need the Space. This should be a pause of one character. March 1, 2016 at 10:57 pm #1391 cswilsonKeymaster Thank you, I have forwarded this to our engineering department for further investigation. November 29, 2016 at 8:46 pm #2198 pe2aabParticipant Hi, Any updates regarding this issue? BR Rick, PE2AAB May 21, 2017 at 12:01 pm #2256 pe2aabParticipant No updates still. We solved it differently by using an external controller. It bypasses the shaky internal controller and give us the functionality we need! We dropped System Fusion. This isn’t adopted in our controller. Too bad. Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.